Mask 3M 8822 FFP2 NR D 8822 with exhalation valve (10 pcs) 3M

Mask 3M 8822 FFP2 NR D 8822 with exhalation valve (10 pcs) 3M. The 3M 8822 mask provides effective, lightweight, comfortable, and hygienic respiratory protection against dust particles and mists.

Its convex shape and design with two adjustable straps, padded nasal area, and metal clip for nose adjustment ensure a perfect fit for most face sizes.

Its exclusive semi-parabolic valve and moisture-resistant filter layer offer long-lasting and comfortable protection, especially in high heat and humidity conditions. The self-filtering mask 3M 8822 is a "maintenance-free" mask, meaning it has no spare parts, which avoids additional cleaning and maintenance costs.

Mask with: Eye protection 3M, Hearing protection equipment 3M.

FEATURES

• The convex shape, double strap design, nose foam, and nasal clip ensure comfortable use for faces of all sizes.
• Reliable and effective FFP2 NR D protection against particles
• Durable inner shell resistant to deformation
• Maximum usage level 12xVLA
• The robust deformation-resistant frame easily adapts to most face shapes and sizes
• The adjustable nasal clip helps seal around the nose and cheeks
• The sculpted nasal panel increases compatibility with different glasses
• FFP2 (filtering facepiece - Class 2) protects against medium levels of fine dust and oil or water-based mists, which typically occur in tasks such as polishing and sanding with power tools, drilling, and cutting painted or varnished materials, cement, wood, and steel.
• The headbands keep the mask in place and provide a good and comfortable seal, with color coding to indicate performance level - blue: FFP2 according to EN 149:2001+A1:2010
• Complies with European standards: CE mark 0086 (EN 149:2001 + A1:2009 FFP2 NR D)
• This product helps protect against certain particles in concentrations up to 10 times the occupational exposure limit
• It is necessary to read all product instructions before use. Misuse can cause serious or potentially fatal injuries or illnesses.
• Do not use in the case of hard woods or paints with a lead base
• Compatible with eye and hearing protection from 3M

RECOMMENDED APPLICATIONS

• Healthcare for virus protection, COVID-19, CORONAVIRUS,
• Pharmaceutical laboratories
• Metal industry
• Powder-based chemical products
• Laboratories
• Powder-based additives
• Food industry
• Orbital sanding
• Drilling
• Sawing
• Manual sanding of paints
• Varnish
• Cement
• Wood and steel

BENEFITS

• Comfort
• Classic convex shape design, with nasal clip and two adjustable straps.
• Comfortable and lightweight. Safety
• Effective and reliable protection against particles.
• Longevity is greater, especially in hot and humid environments thanks to the deformation-resistant inner cover. 3M High Ventilation Valve
• The innovative VAV valve reduces discomfort, allowing exhaled air to escape from the mask and preventing heat buildup inside.

SPECIFICATIONS

APPROVALS

The 3M 8822 mask meets the Basic Safety Requirements specified in Articles 10 and 11B of the European Community Directive 89/686 (transposed in Spain to R.D. 1407/1992). Therefore, the product carries the CE mark.

NORMATIVE

This product has been tested according to the NEW European Standard EN149:2001 and meets the requirements of the FFP2 category of that standard.

The main tests to evaluate its performance are:

• Total inward leakage

Ten people are subjected to a series of exercises while walking on a moving treadmill with the mask on. The total amount of contaminant that passes

into the mask due to leaks through the filter, facial seal, and where applicable, through the valve, is measured. For a mask classified as FFP2, total leakage must not exceed 8% for eight of the ten results obtained.

• Filter penetration

The filter efficiency is tested on twelve masks using a sodium chloride aerosol and also a paraffin oil aerosol. For the FFP2 category, the penetration of both test substances must be less than 6%.

• Flammability

Four masks are passed through a flame at 800°C

+/- 50°C at a speed of 5cm/sec. The mask must not continue to burn once removed from contact with the flame.

• Breathing resistance

The resistance created by the mask is evaluated by passing an airflow of 30 l/min. and 95 l/min. For equipment classified as FFP2, it must not exceed 0.7 mbar and 2.4 mbar at the respective flow rates.

• Information

The standard specifies the complete information that must appear on the mask packaging: Adjustment instructions, usage limits, etc. The EN149:2001 standard can be obtained from the Spanish Association for Standardization (AENOR).

ADJUSTMENT INSTRUCTIONS

Place the mask in your hand with the metal piece for the nose facing towards the tips of your fingers and letting the adjustable straps hang freely below your hand.

Position the mask on your chin with the nasal clip facing up.

Pull the upper strap and place it over the back of your head, over your ears. Pull the lower strap and place it at the nape of your neck.

With the tips of your fingers from both hands on the center of the nasal clip, mold the metal piece by pressing and moving your fingers to both sides of the nasal piece. Performing this operation with one hand may lead to a poor fit of the clip and, therefore, to reduced effectiveness in protection.

Before entering the work area, the correct fit of the mask must be checked. To do this, perform the following test:

a) Cover the front of the mask with both hands, being careful not to change its position.

b) Exhale forcefully. You should feel a positive pressure inside

the mask. If any loss of pressure or air escaping from the edges is detected, readjust the position of the mask and/or the tension of the adjustable straps. Check the fit again and repeat the operation until the mask is perfectly adjusted.

NOTE: Do not use with a beard or other facial hair that may prevent a perfect seal between the face and the mask.

WARNINGS

• As with any other respiratory protective equipment, the user must receive training on how to use the equipment correctly.

• This mask does not protect against gases, vapors, solvents from spray painting operations, or atmospheres with oxygen deficiency (< 19.5%).

• Use only in properly ventilated areas where there is no oxygen deficiency situation.

• Do not use when contaminant concentrations exceed the IDHL (immediately dangerous to life or health concentration).

• Leave the area immediately if:

* Breathing becomes difficult

* You feel dizzy or unwell

• Change or replace the mask if it has been damaged, or if breathing resistance becomes excessive, or when it has reached the end of its useful life.

• Do not modify or alter the equipment

• All respiratory protection is effective if the correct equipment has been selected, is fitted correctly, and is used throughout the time you are exposed to the contaminant.

3M and SEKURECO offer you a comprehensive advisory service that includes training courses, implementation of respiratory protection programs, and technical support to answer all your inquiries.

VIDEOS