Elastic tape fastening element with energy absorber for scaffolding.

• Energy absorber with safety elastic tape for work on scaffolding ABM SCF and eyelets at its ends.
• Approved for use in explosion risk areas
• Material:

Safety elastic tape - Polyester
Energy absorber - Polyamide

• Maximum elongation of energy absorber: 0.7 m
• AZ002 (galvanized steel, 18 mm opening)
• AZ011 (galvanized steel, 18 mm opening)

----------------------------------------------------------

Work at height involves a series of significant risks for workers, who must add the danger of falling from different heights to the inherent risks of their specific activity. An accident due to a fall from a different level poses a high risk to the health and integrity of workers, which requires each professional to have appropriate Personal Protective Equipment (PPE), as well as various elements such as the elastic tape anchoring element with energy absorber for scaffolding.

The elastic tape anchoring element with energy absorber for scaffolding is a device that features an energy absorber with safety elastic tape for work on scaffolding ABM SCF and has eyelets at its ends, being approved for use in explosion risk areas. It is made of polyester for the safety elastic tape and polyamide for the energy absorber. The maximum elongation of the absorber is 0.7m and it also comes equipped with two galvanized steel carabiners with an 18 mm opening.

The anchoring elements are very important in helping to reduce the chances of a fall from a different level, which could have very negative consequences for the integrity and health of workers, always keeping in mind that these types of devices cannot be used alone to stop falls unless the manufacturer explicitly states otherwise. It is important to consider this point to avoid creating a situation of great risk for the worker.

The only way it can be used as a fall protection device is by connecting it to an energy absorber, keeping in mind that in this case, the maximum length of the assembly should not exceed two meters and, of course, both components must be compatible with each other, for which one must pay attention to the recommendations and indications of the manufacturer of the absorber.

All equipment and devices designed for use in the workplace must always be in perfect condition, so they must be thoroughly checked periodically and inspected by the worker before each use, avoiding the use of the element if any type of deterioration is detected that could create a situation of maximum risk for the operator.